Kits There are 15 products.

Rebuild kits to make your repairs easier and more cost effective.

per page
  • Baby Pac Vidiot board 5 piece potentiometer kit. Includes pots for volume, R/G/B & Sync. Knobs can be adjusted with a straight slot pot tool.

    $4.20
    Out of stock
    Add to cart
  • Bally -35 MPU repair kit Includes all parts that typically need replacing on acid damaged boards. This kit includes a new 5101 ram and socket. Also includes items C1, C2, C3, C5, C13, C80, CR5, CR7, CR8, CR44, R1, R2, R3, R11, R12, R16, R17, R24, R28, R29, R107, R112, R134, R140, Q1, Q2, Q5 & VR1.

    $12.45
    Out of stock
    Add to cart
  • Bally / Midway Optical Encoder PCB Mtg Hardware Kit This kit will work with our Tron Encoder PCB and most other midway spinner PCB's. Includes qty 4 screws and qty 4 standoffs. Replaces Midway PN's 0017-00101-0124 & 0017-0042-0285

    $1.95
    Out of stock
    Add to cart
  • GO7 Remote pot kit. This kit replaces all the pots which are located on the main chassis. The remote board can be mounted in the front of the cabinet to allow for easy adjustment. Includes remote pot board, adapter board, 3ft cable assembly and mounting hardware.

    $29.56
    In Stock
  • Electrohome GO7-CBO 19" cap kit. This kit includes all 19 capacitors needed to recap the chassis. All capacitors are quality Nichion brand caps rated at 105°.  The 680uf filter cap is available separately, if needed.  A cap map is available for download. Click the 'more details' tab and select download tab.

    $9.75
    In Stock
  • This LED kit replaces the standard bulbs with bright cool white led's. Includes nine 2-led bulbs for playfield holes 1 through 9, one red led for hole 10 and two frosted white for coin door lights. No modifications needed, just swap the bulbs and play. Kit is for Taito version of Ice Cold Beer and Taito Zeke's Peak.

    $8.95
    Out of stock
    Add to cart
  • Taito Ice Cold Beer PCB Cap Kit Contains all 5 electrolytic caps found on the cpu board.

    $3.75
    In Stock
  • This qbert power supply kit was put together with many upgrades for weak components that commonly fail on these boards. In no way will this make your power supply indestructible but it will increase its life greatly and bring your dead power supply back to life. This kit can be used for other Gottlieb games such as Mad Planets and Krull that use the same...

    $24.75
    In Stock
  • This is a complete fuse kit for your original Q*Bert transformer power brick located at the bottom of the cabinet. It includes all 5 slow blow fuses found on the power brick for locations F1, F2, F3, F4, F5. The kit also includes the knocker fuse located at location F6.

    $5.69
    Out of stock
    Add to cart
  • Q*Bert sound board capacitor kit. Contains all electrolytics found on the sound board.

    $2.50
    Out of stock
    Add to cart
  • Sanyo 20EZ pot kit. Includes the 5 pots located on remote pcb. PCB not included, shown as reference only. *Note kit includes 220k ohm instead of 200k ohm. These have been tested and found to be a suitable replacment.

    $6.95
    Out of stock
    Add to cart
  • Sanyo 20EZ Remote Pot Kit. This kit relocates the five pots from the rear of the monitor to a remote board. The remote board includes a detatchable 3 foot cable and can be mounted for easy access to the pots without moving the machine or removing the rear door. Includes adapter pcb, remote pot pcb, pot knobs,  cable and mounting hardware.

    $28.65
    In Stock
Showing 1 - 12 of 15 items