Arcade machine parts in brand specific category's.
This is a replacment 100 ohm pot for your Q*Bert power supply. It is a direct replacment for your wore out original. This part is included in the Qbert power supply rebuild kits.
10K Ohm Vertical Pot Replacment for volume pot used on many Midway boards such as Pacman, Galaxian, Omega Race, etc.
200Ω 5 Watt Axial Resistor Used on QBert power supply location R23.
AM9101 / P2101 256x4 Static Ram22 Pin .4" DIP PackageUsed on many arcade pcbs such as Centipede & Millipede C2101 / P2101 256X4 Static Ram 22 Pin .4" DIP PackageUsed on many arcade pcbs such as Centipede & Millipede
2111A 256 x 4 Bit Static Ram18 Pin DIP PackageSub 8111A, 91L11Used on many Atari games
1K X 4 Static Ram18 Pin DIP Package Used on Pac & Mspac 4K-4R Also used on many other arcade pcbs Tested used pulls in good condition
Intel D2125 256 x 1 bit dynamic ram. Pulls in good condtion. These are used on PacMan and many other arcade machines.Ceramic package 16 pin .3" dip
22/44 Pin Solder Eyelet Edge Connector This is the most common size edge connector found in arcade games other than Jamma.
X2804AP-45512 X 8 nMOS EEPROM Memory24 Pin DIP PackageUsed on many atari games